Limited Editions: The Drop
27th February 2026
Limited Editions: The Drop
Welcome to the Bare Knuckle Limited Editions: Ultimate Expression.
Our Limited Edition range is always changing, which is what makes it so exciting. Each time you check in, you'll find something new. This week we have had a proper drop! Loads of brand new and stunning designs, only available until they are bought by one of you. Words are not necessary here, just enjoy the eye candy and revel in the new designs.
Fresh from the Bare Knuckle Custom Shop, we have a custom powder-coated Telecaster control plate in antique bronze finish with black knobs, built up with our most premium components and all handwired in our UK workshop.
A very special edition Misha Mansoor Ragnarok 7 string humbucker set, with black bobbins, black bolts, custom skull etch and 4-conductor wiring.
Love this custom Blackguard series Flat '50 Tele singlecoil pickup set with antique bronze powdercoated cover on the neck pickup.
An incredible Adam "Nolly" Getgood Polymath humbucker set with custom white / black Polymath etch bobbins and TV covers with black bolts.
Keeping it retro with Adam "Nolly" Getgood's PolyPaf humbucker set. This has custom matte grey covers and candy red hex bolts and baseplates
Swing into this '60's inspired special edition Stockholm soapbar HSP90 set with black TV covers, black pole screws and custom black / white swirl insert.
Another of Adam "Nolly" Getgood's Polymath humbucker sets, this time with custom black and nickel crackle etch covers and black screws.
Amazing Holydiver humbucker calibrated bridge and neck set, with custom nickel / crackle etch covers and black screws.
Just love this antique bronze / crackle etch Holydiver humbucker calibrated bridge and neck set.
More crackles with this Misha Mansoor Ragnarok 6 string humbucker set, with 53mm bridge spacing and custom black / silver crack bobbins, black screws and 4-conductor wiring.
Check out the tiny skull etch! Special edition Misha Mansoor Ragnarok 6 string humbucker set, with 53mm bridge spacing and black bobbins, custom white bolts with skull etch and 4-conductor wiring.
This is a custom powder-coated Telecaster control plate in red finish with black knobs, built up with our most premium components and all handwired in our UK workshop.
Head on over to our Limited Edition page to check out the full range, and don't forget that if you have your own design, drop us an email at [email protected] and talk to us. We can bring your design to life!
