PAT Pend '59 Slab Board Single strat
After the success of the Blackguard Tele Series it seemed logical to extend the concept and produce a collection of vintage correct Strat sets based on customer demand for coils from specific eras. The PAT Pend Series centres in on the two most requested periods between '59-'62 and '63-'65.
The introduction of a rosewood 'slab' fingerboard in 1959 was a milestone in Strat tone, arguably producing a warmer tone than the earlier one-piece maple necks. The '59 Slab Board coils are made with vintage correct black fibreboard flatwork, hand-bevelled Alnico V magnets and scatter-wound by hand with 42AWG Heavy Formvar wire. The tone is hollow and woody with tight, punchy, bottom-end snap and crisp, clear highs. Both chording and single note playing is wonderfully percussive and the moderate vintage output is perfect for extra cut with a slab board neck.
Pickup media section
Peach Guitars said of the ‘59 Slab Board set:
Published on 1 Aug 2016
“Both chording and single note playing is wonderfully..."
Read existing customer reviews.
Read Related ReviewsIntroducing Anomaly Pickup Surrounds
8th October 2018
These fantastic new high quality pickup surrounds are now in stock and available in our online store.
Continue readingKeep up to date with our latest sound tests and customer reviews on our YouTube channel.
Bare Knuckle PickupsApplications
-
Blues, Country, Jazz, Funk, Reggae, Indie, Pop, Britpop, Classic Rock.
Suitability
The '59 Slab Board set is well suited to warmer alder bodied Strats with slab rosewood boards or for really bringing out the edge of ash body/ maple neck.
Specification
- Position: Bridge
- DC Resistance: 5.9 kΩ
- Magnet: Alnico 5
- Position: Middle
- DC Resistance: 5.6 kΩ
- Magnet: Alnico 5
- Position: Neck
- DC Resistance: 5.6 kΩ
- Magnet: Alnico 5
PAT Pend '59 Slab Board Single strat options
- For compatibility with other Strat coils the PAT Pend Strat Series are wound top going top left, south polarity. Original north polarity can be arranged if desired.
- Vintage stagger or flat magnet profile.
- Stock wound or RWRP mid coil (for hum-cancelling in 2&4).
- Zinc plated steel baseplates for extra power and bottom end.
- White, Black, Parchment, Cream, Mint Green covers or fully aged coils and covers